Wednesday, June 30, 2010

Range day!

Last winter I acquired a reprint of H.G. Wells' Little Wars, that most original and elegant of wargaming tretises. First published in 1913, this very slim volume set an early standard for wargaming in which the obvious agenda is fun and the not-so-hidden agenda is the futility of war and the advantages of peace.

The clever prose and the droll attention to simplicity and pragmatism make this a delight to read.

With the recent addition to the arsenal of that classic of all play-room floor skirmishes, the Britians's 4.7" naval gun, I'm now set to put Wells' pedantry into practice.

This beautifully manufactured breech-loading, spring fired gun is, in the words of H.G. Wells, a "priceless gift to boyhood", and this boy could not agree more.

The gun, purchased on ebay (for a song) a week ago is a beauty which operates flawlessly.  I've long coveted one of these guns, but not until this one appeared as a bargain, was a gun of this caliber (and caliber) within my easy reach.

The gun, coupled with my copy of Little Wars has put classic table top (or playroom floor) gaming within my reach.  Although the gun came sans ammunition, with guidance from Wells and a fully appointed woodshop, I set about making projectiles for this fierce iron dragon.

Although Wells writes of the shells being an inch long, I opted for an extra quarter inch to accommodate my ever stiffening fingers.

Here, I am filing stabilizing flutes into the sides of a projectile.

Something makes me think that these flutes will improve the ballistic characteristics of the shell.

I manufactured four different types of projectile:

From left to right: fluted, boat-tailed, tapered, and straight peg.

Prior to testing, I made one more which has spiral fluting.

Now its off to the range with field marshall Max Elevation to test each type of projectile.

Here, you can see one in mid-flight:

Captured here in closeup.

The fall of each shot was marked and recorded for a five-shot average for each of the five types of projectiles.

An initial distance of 14 inches revealed that the boat-tail was best left on the drawing board.

Upon their first outing, the straight peg and the taper were running neck and neck at a very respectable 80-ish inches.

With many extra inches it was the fluted rounds that took the prize for both distance and accuracy.

In the end, the fluted projectiles had the clear advantage, though there was little difference between the two types of fluted shells over an average of five shots. The fluting must, as I had hoped, provide some in-flight stability, averaging a very respectable 79 inches.

Now that the gun has been tested and a prototype ammunition has been selected for manufacture...

Ominous signs of future conflict are gathering in the basement:

I'll report back on the 15th of next month with dispatches from the front.  Until then...

Soldier on!


Tuesday, June 29, 2010

Something I'm Looking Into:

I'll keep you posted.

In the mean time, soldier on!



Monday, June 14, 2010

The way you wear your hat: modifying Toy Soldiers of San Diego kepis

Hello toy soldier enthusiasts,  here's another attempt at a "how to" video in which I play 54mm. habedasher
to some dismounted cavalry.

You can view the video by clicking here.

Unmodified kepi on right, modified kepi on left

See you on the 1st of the month.

Soldier on!