Book!

It's an exciting thing to open a carton and find it's full of the book one wrote.

 

New Zouave conversion

They've been around since 2006, but this is the first I've heard of them.

Danila Souvenirs of Estonia makes some pretty nice 54mm metal toy soldiers.  They have a couple of infantrymen - Union and Confederate, a couple foot officers, Lincoln, Grant, Lee, and some mounted figures.

They are the quality that W. Britians were twenty years ago.

They're half the price of current Britains, so  I bought a foot officer to repaint as a major for the 114th PA zouave regiment that I'm raising.

I'm happy with the way he came out.

Zouaves are cool.

Soldier on!

Mannie

Zouaves!

 Sidetracked again.

Regular followers of this blog know that I frequently make big noise about doing one thing, and then I get distracted by something else.  Well, here I go again.

Over the past few weeks I've been raising a regiment of  55-60mm zouaves to comprise the 114th PA regiment  (Collis' zouaves).  I'm gathering not just the W. Britains 114 zouaves, but others as well, all makes and models, including home-cast.  As a result, I have much painting to do to make them all uniform. 

I have to turn these guys...

into these guys...

 I've started on the painting, and it will take some time, but I think it will be done by winter.  It will be my seventh (and final) regiment of 51 men.

Stay tuned and...

Soldier on!

Mannie

 

Retirement project. I've written a book

 Dear friends,

One of the reasons that I have been so delinquent in posting to this blog over the last year, is that I have been writing a book: Lie, Cheat, and Steal: one boy's Navy adventure.

It will be available on Amazon in August of 2026, but you can read it for free, in its entirety right here:

Lie, Cheat, and Steal: one boy's Navy adventure

Happy reading, and...

Soldier on!

Mannie

Marx: The Battle of Antietam

Today I've begun the long and tedious set-up for my next toy soldier scenario, which will be vignettes from the Sept 17, 1862 battle of Antietam.

I was a park ranger at Antietam National Battlefield for many years, and it will be a nice homecoming to revisit this story.

It will be an ongoing process that will feature Marx figures exclusively, and many of the scenics will be Marx, but I'll also be utilizing many of my homemade terrain elements as well to fill-out the battlefield.

Pictured here is a test of the action in the West Woods.  Experienced toy soldier enthusiasts will recognize the danger of the dreaded "domino effect" represented by these long lines of soldiers.  I hope that I don't bump the table.

Thank you for your patience during these many months of inactivity, but do check in occasionally to see how things are progressing.

And as always, click on the photo for a larger and more pleasing view.

Until next time,

Soldier on!

Mannie 

A Fanciful Cannon

(Originally posted July 2010)

I've always been a fan of artillery, especially the heavy guns used during the Great War.  With all those rivets, gears, wheels, steel and brass, there's something positively steam-punk about the look.

Having recently acquired a beautiful and classic Britain's 4.7" naval gun, I decided to increase my artillery holdings while at the same time staying within my budget.  Out I went to my shop - Victory Wood Working - to dig through the scrap pile for some odd pieces of mahogany,  Armed with the wood,    the time and the tools, now I had to find a likely candidate.

There is a dizzying array of available subjects, and I chose to cherry pick the more dramatic features of several guns and combine them into one fancifully generic cannon.

Every shop project starts with a drawing and this one was no exception.  Using the journal book my sweetie got me for my birthday I sketched out plans that incorporated my favorite WWI gun features.

Identifying Clausewitz's "center of gravity" for the project was important, that one piece upon which the whole assembly would depend.  That turned out to be the yoke which would support the barrel and the recuperator cylinders.  The milling began at the drill press with measured holes (determined by the sizes of my available spade bits) drilled through a piece of mahogany.

From the drill press station the piece moved to first, the band and scroll saws to be roughed out and then to the belt sander where it became the yoke.

Hand sanding with fine files and sand paper sticks produced this finished piece:

I clamped another piece of mahogany stock into the wood lathe and started removing wood, being careful to measure a consistent diameter as I went along.

This became the barrel of the piece.

Like all sculpture, one simply removes all of the material that doesn't look like the thing which one is trying to sculpt.   The grain on this mahogany required as much time sanding as chisel and scraper work.

Following a good deal of careful sanding, the finished barrel fit perfectly into the yoke.

Then it came time to build the carriage.  I glued and clamped two pieces of mahogany to provide the right thickness for the carriage.  I traced the outline onto the stock and, after drilling the hole for the trunnions, I returned to the band saw to release the carriage from the block of wood.

And it seemed pretty happy to get out of there.

Next I built the elevation gear which would appear so prominently beneath the recoil track of the barrel.  These enormous toothed-gears are a distinctive feature of the big guns of the Big War.

The components in raw mahagony.  The maple plywood is a pattern for what will become the wheels.

Building the breach block required as much hand work as power tools

Everything fit together nicely, though this is the point at which I started to rethink the asthetics of my recuperator cylinders.

Temporarily mounted on wheels, everything is looking pretty good, except for those cylinders. The look so...long.

I broke my mahogany habit long enough to build the gun shield out of maple plywood.  I'm still not sure that this was the best choice, but onward I went, gluing and clamping.

Back to the lathe to turn two jolly, fat projectiles which fit in their mechanized (pretend, that is) loading tray.  Yes, this is a large caliber gun.

Now on to the wheels.  I didn't want to have to deal with spokes, and fortunately WWI was an era of a variety of spokeless steel wheels.  I fit characteristic "duck boards" around the diameter and shaped reinforcing ribs on my disc sander.  The masonite duck boards were the only instance of using hot glue rather than wood glue.

Wheels complete, and temporarilly mounted, it was time to glue and clamp the gun shield into place.

By this time, I made the decision to shorten the recuperator cylinders, and I'm so glad that I did.

At that point all the sub assemblies got a good coat of grey primer.

I also took a moment to simulate some rifling in the muzzle.

Then it was time to move out of the shop and into the sunshine to apply the "dazzle" camoflauge scheme to the piece.  What a beautiful morning.

And "voila" as my beloved French say;  my heavy gun is at the front and ready for action.

With the barrel returned to the "in battery" position, the loading tray is ready to be elevated and the next round rammed into the breech.

The Huns are menacing even in small scale.

Sacrebleu!  I think I've just painted myself into a corner.

Until next time, Soldier On!

Mannie

Hope for the future

Soldier on!

Mannie

Marx Giant Blue and Gray pt 2

 Summer fun.

Pictured, is no particular battle, it's just the inventory of what I'll be working with in my all-Marx (mostly) battle scenario.

It'll be fun.

Soldier on!

Mannie

Shutdown memories, and time well spent

 In the season of government shutdowns, I recall a very productive few weeks when I still worked for the National Park Service.  I seem to remember that it was a four week shutdown and everyone was sent home to listen to the news and watch their savings balance dwindle.  I, however, had a pretty good experience.  I spent the time casting and painting what was to become my 3rd South Carolina Infantry Battalion (https://toysoldiersforever.blogspot.com/2019/01/third-south-carolina-infantry-battalion.html).  

This 202 man rebel unit is the foil to my 286 man-strong 3rd Michigan project (https://toysoldiersforever.blogspot.com/2012/02/old-third-all-present-or-accounted-for.html) .  Michigan took eighteen years to complete, and South Carolina only took seven, as I wasn't making my own molds as I did with Michigan.

The shutdown made for many fun, but chilly, days out in the shop casting, and warmer days in the studio painting.  

The men of the Palmetto State reporting for duty.

It was time well spent - among little pewter men, and far away from the hustle and bustle of working in Washington DC.

Have a happy new year, and...

Soldier on!

Mannie